Users Guide

44 | Configuring AMP Dell PowerConnect W-AirWave |Version 7.3
1. Go to the AMP Setup > Users page. This page displays all users currently configured in AMP. Figure 18
illustrates the contents and layout of this page.
Figure 18 AMP Setup > Users Page Illustration
2. Select Add to create a new user, select the pencil icon to edit an existing user, or select a user and select
Delete to remove that user from AMP. When you select Add or the edit icon, the Add User page appears,
illustrated in Figure 19.
Figure 19 AMP Setup > Users > Add/Edit User Page Illustration
3. Enter or edit the settings on this page. Table 20 describes these settings in additional detail.
Table 20 AMP Setup > User > Add/Edit User Fields and Default Values
Setting Default Description
Username None Sets the username as an alphanumeric string. The Username is used when logging in to AMP and
appears in AMP log files.
Role None Specifies the User Role that defines the Top viewable folder, type and access level of the user
specified in the previous field.
The admin user defines user roles on the AMP Setup > Roles page, and each user in the system is
assigned to a role.
Password None Sets the password for the user being created or edited. Enter an alphanumeric string without
spaces, and enter the password again in the Confirm Password field.
NOTE: Because the default user's password is identical to the name, it is strongly recommended
that you change this password.
Name None Allows you to define an optional and alphanumeric text field that takes note of the user's actual
name.
Email Address None Allows you to specify a specific email address that will propagate throughout many additional
pages in AMP for that user, including reports, triggers, and alerts.
Phone None Allows you to enter an optional phone number for the user.
Notes None Enables you to cite any additional notes about the user, including the reason they were granted
access, the user's department, or job title.