Users Guide

Dell PowerConnect W AirWave 7.2 | User Guide Using RAPIDS and Rogue Classification | 169
1. Navigate to the RAPIDS > Setup page.
2. From the Containment Options section, select Yes to manage rogue AP containment. Once this is done, the
Contained Rogue classification will appear as an option in the classification dropdown menu as shown in
Figure 115.
Additionally, once this option been enabled, the option to manage contained APs in Monitor-Only mode
becomes available. Containment in Monitor-Only mode means configuration changes will still be pushed to
the controller, even though it is in monitor-only mode.
Figure 115 RAPIDS > Classification Rule Menu with Containment
From the APs/Devices > Rogues Contained page, you can see the containment status information, as shown in
Figure 116.
Figure 116 Rogue Containment Status Page
Additional Settings
Additional RAPIDS settings such as role filtering and performance tuning are available in the following locations:
 Use the AMP Setup > Roles > Add/Edit Role Page to define the ability to use RAPIDS by user role. Refer to
“Creating AWMS User Roles” on page44.
 Use the AMP Setup > General > Performance Tuning page to define the processing priority of RAPIDS in
relation to AWMS as a whole (see Table 15 on page 40).
Defining RAPIDS Rules
The RAPIDS > Rules page is one of the core components of RAPIDS. This feature allows you to define rules by
which any detected device on the network is classified.
This section describes how to define, use, and monitor RAPIDS rules, provides examples of such rules, and
demonstrates how they are helpful.
This section contains the following topics:
 “Controller Classification with WMS Offload” on page170
 “Device OUI Score” on page170
NOTE: The Rogue Containment device tab is only present for devices that support containment.