Users Guide

192 | Performing Daily Administration in AWMS Dell PowerConnect W AirWave 7.2 | User Guide
Figure 132 Users > Guest Users Page Illustration
Guest users associated to the wireless network appear on the same list as other wireless users, but are
identified as guest users in the Guest User column. The User Detail page for a guest user also contains a box
with the same guest information that appears for each user on the Users > Guest Users list.
5. To add a new guest user, select Add, and complete the fields illustrated in Figure 133. Table 113 above
describes most fields. The first three fields are required, and the remaining fields are optional.
Table 113 Users > Guest Users Fields
Field Description
Repair Guest User
Errors
Sets AWMS to attempt to push the guest user again in an attempt to repair any errors in the Status
column.
Add New Guest User Adds a new guest user to a controller via AWMS.
Username Randomly generates a user name for privacy protection. This name appears on the Guest User detail
page.
Enabled Enables or disables the user status. Set the status of the guest user as active (enabled) or expired
(disabled).
Email Displays the optional email address of the user.
Company Name Displays the optional company name for the user.
Sponsor Name Displays the name of the sponsor for the guest user. This setting is optional.
Expiration Displays the date the guest user's access is to expire.
WLAN Profile Sets the SSID that the guest user can access. This setting applies to Cisco WLC only.
Status Reports current status by the controller. If error messages appear in this column, select the user with
the checkbox at left, and select the Repair guest user errors button.