Users Guide

86 | Configuring and Using Device Groups in AWMS Dell PowerConnect W AirWave 7.2 | User Guide
6. Locate the EAP Options area on the Groups > SSIDs page, and complete the settings. Table 55 describes the
settings and default values.
7. Locate the RADIUS Authentication Servers area on the Groups > SSIDs configuration page and define the
settings. Table 56 describes the settings and default values.
8. Select Save when the security settings and configurations in this procedure are complete.
9. Locate the RADIUS Accounting Servers area on the Groups > SSIDs configuration page and define the
settings. Table 57 describes the settings and default values.
10. Select Save to retain these Security configurations for the group, select Save and Apply to make the changes
permanent, or select Revert to discard all unapplied changes.
11. Continue with additional security-related procedures in this document for additional RADIUS, and SSID
settings for device groups, as required.
Table 55 Groups > SSIDs > EAP Options Section Fields and Default Values
Setting Default Description
WEP Key Rotation
Interval
120 Time (in seconds) between WEP key rotation on the AP.
Cisco TKIP No If enabled, Cisco Temporal Key Integrity Protocol (TKIP) provides per-packet key
mixing, a message integrity check and a re-keying mechanism, thus fixing the flaws of
WEP.
NOTE: TKIP can only be enabled when EAP-based security is used.
Cisco MIC Disabled If enabled, Cisco Message Integrity Check (MIC) adds several bytes per packet to
make it more difficult to tamper with the packets.
Table 56 Groups > SSIDs > RADIUS Authentication Servers Fields and Default Values
Setting Default Description
RADIUS Authentication Server
1-3
(ProCurve420, Proxim only)
None Drop-down menu to select RADIUS Authentication servers previously entered on
the Groups > RADIUS configuration page. These RADIUS servers dictate how
wireless clients authenticate onto the network.
Authentication Profile Name
(Proxim Only)
None Sets the Authentication Profile Name for Proxim AP-600, AP-700, AP-2000, AP-4000.
Authentication Profile Index
(Proxim Only)
None Sets the Authentication Profile Index for Proxim AP-600, AP-700, AP-2000, AP-4000.
NOTE: You may need to return to the Groups > Security configuration page to configure or reconfigure RADIUS servers.
Table 57 Groups > SSIDs > Radius Accounting Servers Fields and Default Values
Setting Default Description
RADIUS Accounting Server
1-3 (Proxim Only)
None Pull-down menu selects RADIUS Accounting servers previously entered on the Groups
> RADIUS
configuration page. These RADIUS servers dictate where the AP sends
RADIUS Accounting packets for this SSID/VLAN.
Accounting Profile Name
(Proxim Only)
None Sets the Accounting Profile Name for Proxim AP-600, AP-700, AP-2000, AP-4000.
Accounting Profile Index
(Proxim Only)
None Sets the Accounting Profile Index for Proxim AP-600, AP-700, AP-2000, AP-4000.