Users Guide

Figure 92: Interface Monitoring Page for a Wired Device
An Interface Monitoring page is comprised of three sections: Interface Information, Usage and Interface Frame
Counters graphs, and Connected Clients.
Specifics of the interface are in the Interface Information section, as depicted in Figure 93.
Figure 93: Individual Interface Information Section
Bandwidth, and various standard and enterprise specific error counting information is displayed in the lower section
in a tabbed graph, which are shown in Figure 92 above.
Connected Clients, if any, are listed in a table below the interactive graphs as shown in Figure 94.
Figure 94: Connected Clients list in APs/Devices > Interface Monitoring for a selected interface
What Next?
All device lists in AirWave act as portals to management pages if you have the proper read/write privileges. Selecting
the wrench or pencil icon next to a device table entry, or selecting Modify Devices where appropriate above a device
table, will take you to the appropriate Management page (APs/Devices > Manage). For more information, see
"Configuring and Managing Devices" on page 131.
Auditing Device Configuration
When you have added a newly discovered device successfully to a Group in Monitor mode, the next step is to verify
device configuration status. Determine whether any changes will be applied to that device when you convert it to
Dell PowerConnect W-AirWave 7.6 | User Guide Discovering, Adding, and Managing Devices | 129