Users Guide

Setting Default Device Type Description
the device
Latitude
None All
Text field for entering the latitude of the device. The latitude is used
with the Google Earth integration.
Longitude
None All
Text field for entering the longitude of the device. The longitude is
used with the Google Earth integration.
Altitude (meters) None All
Text field for entering the altitude of the device when known. This
setting is used with the Google Earth integration. Specify altitude in
meters.
Group
Default Group All
Drop-down menu that can be used to assign the device to another
Group.
Folder
Top All
Drop-down menu that can be used to assign the device to another
Group.
Auto Detect
Upstream
Device
Yes All
Selecting Yes enables automatic detection of upstream device,
which is automatically updated when the device is polled.
Selecting No displays a drop-down menu of upstream devices.
Automatically
clear Down
Status Message
when device
comes back up
None All
Whether the message entered in the Down Status Message field
should be removed after the device returns to the Up status.
Down Status
Message
None All
Enter a text message that provides information to be conveyed if the
device goes down.
AP Group
Installation
Mesh Mode
Administrative
Status
Enable All Enables or disables administrative mode for the device.
Mode Local All
Designates the mode in which the device should operate. Options
include the following:
l Local
l H-REAP
l Monitor
l Rogue Detector
l Sniffer
4. Complete additional settings on the APs/Devices > Manage page, to include H-REAP, certificates, radio
settings, and network settings. Table 82 describes many of the possible fields.
NOTE: For complete listing and discussion of settings applicable only to Dell PowerConnect W-Series devices, see the Dell
Power Connect W Configuration Guide.
Dell PowerConnect W-AirWave 7.6 | User Guide Discovering, Adding, and Managing Devices | 135