Users Guide

198 | Performing Daily Administration in AirWave Dell PowerConnect W-AirWave 7.6 | User Guide
Description
Client RADIUS
Authentication Issues
This trigger type sets the threshold for the maximum number of failures before an alert is issued
for a user. Select Add New Trigger Condition to specify the count characteristics that trigger an
alert. The Option, Condition, and Value fields allow you to define the numeric value of user issues.
Device RADIUS
Authentication Issues
This trigger type sets the threshold for the maximum number of failures before an alert is issued
for a device. The Option, Condition, and Value fields allow you to define the numeric value of user
issues.
Total RADIUS
Authentication Issues
This trigger sets the threshold for the maximum number of failures before an alert is issued for
both users and devices.
Table 110: RADIUS Authentication Trigger Types and Condition Settings
b. Repeat this procedure for as many triggers and conditions as desired. Refer to the start of "Creating New
Triggers" on page 191 to create a new trigger.
Setting Triggers for IDS Events
Perform the following steps to configure Intrusion Detection System (IDS)-related triggers.
a. Choose the Device IDS Events trigger type from the drop-down Type menu. See Figure 131. Table 111
describes condition settings for this trigger type.
IDS Trigger
Options
Description
Device IDS Events
This trigger type is based on the number of IDS events has exceeded the threshold specified as Count in
the Condition within the period of time specified in seconds in Duration. Alerts can also be generated
for traps based on name, category or severity. Select Add New Trigger Conditionto specify the count
characteristics that trigger an IDS alert.
Rogue Device
Classified
This trigger type indicates that a device has been discovered with the specified Rogue Score. Ad-hoc
devices can be excluded automatically from this trigger by selecting Yes. See "Using RAPIDS and
Rogue Classification" on page 169 for more information on score definitions and discovery methods.
Once you choose this trigger type, select Add New Trigger Condition to create one or more conditions.
A condition for this trigger enables you to specify the nature of the rogue device in multiple ways.
Client on Rogue
AP
This trigger type indicates that a client has associated to a rogue AP. Available conditions include
rogue classification, and whether the client is valid.
Table 111: Device IDS Events Authentication Trigger Types and Condition Settings
b. Repeat this procedure for as many triggers and conditions as desired. Refer to the start of "Creating New
Triggers" on page 191 to create a new trigger.
Setting Triggers for AirWave Health
After completing steps 1-3 in "Creating New Triggers" on page 191, perform the following steps to configure IDS-
related triggers.
a. Choose the Disk Usage trigger type from the drop-down Type menu. See Figure 131 for trigger types. Table
112 describes the condition settings for this trigger type.