Users Guide

This view is focused on the wireless user enabling you quick resolution of a user's issues and therefore disables most
RF objects by default.
l Users - only the user in focus is displayed
l APs - only the access point in which the focus client is associated with is displayed
l Radios - the heatmap represents only the radio to which the client in focus is associated
l Rogues - all rogues are off
l Client/Rogue Surveys - all surveys are off
l Walls - all walls are displayed
l Lines - client to AP of association
l Labels - all labels are disabled
Tracking Location History
Select a client icon in the floor plan and select Display from the pop-up menu shown in Figure 223:
Figure 223: Show Location History
A location history player, illustrated in Figure 224, appears at the bottom of the QuickView window.
Figure 224: Location History Player
Checking Signal Strength to Client Location
1. On a floor plan, locate the Signal Cutoff menu.
2. Select the desired signal level to display, as shown in Figure 225. The heatmap updates immediately.
Figure 225: Signal Cutoff dBm Dropdown Menu
Dell PowerConnect W-AirWave 7.6 | User Guide Using VisualRF | 291