Users Guide

28 | Configuring AirWave Dell PowerConnect W-AirWave 7.6 | User Guide
Figure 17: AMP Setup > Users > Add/Edit User Page Illustration
3. Enter or edit the settings on this page. Table 17 describes these settings in additional detail.
Setting Default Description
Username None
Sets the username as an alphanumeric string. The Username is used when logging in to
AirWave and appears in AirWave log files.
Role None
Specifies the user’s Role, which defines the Top viewable folder as well as the type and access
level of the user specified in the previous field.
The admin user defines user roles on the AMP Setup > Roles page, and each user in the system
is assigned to a role.
Password None
Sets the password for the user being created or edited. Enter an alphanumeric string without
spaces, and enter the password again in the Confirm Password field.
NOTE: Because the default user's password is identical to the name, it is strongly recommended
that you change this password. Changing your password will log you out.
Name None
Allows you to define an optional and alphanumeric text field that takes note of the user's actual
name.
Email
Address
None
Allows you to specify a specific email address that will propagate throughout many additional
pages in AirWave for that user, including reports, triggers, and alerts.
Phone None Allows you to enter an optional phone number for the user.
Notes None
Enables you to cite any additional notes about the user, including the reason they were granted
access, the user's department, or job title.
Table 17: AMP Setup > Users > Add/Edit User Fields and Default Values
4. Select Add to create the new user, Save to retain changes to an existing user, or Cancel to cancel out of this
screen. The user information you have configured appears on the AMP Setup > Users page, and the user
propagates to all other AirWave pages and relevant functions.