Users Guide

Figure 47:Comparing Two Devices Groups on the Groups > List > Compare Page (Partial View)
3. Note the following factors when using the Compare page:
l The Compare page can be very long or very abbreviated, depending on how many configurations the
device groups share or do not share.
l When a configuration differs between two groups, the setting is flagged in red text for the group on the
right.
l The default setting of the Compare page is to highlight settings that differ between two groups.
n To display settings that are similar or identical between two device groups, select Show Similar Fields
at the top left of the page. The result may be a high volume of information.
n Select Hide Similar Fields to return to the default display, emphasizing configuration settings that
differ between two groups.
l You can change the configuration for either or both groups by selecting Edit in the corresponding column
heading. The appropriate configuration page appears.
l If you make and save changes to either or both groups, go back to the Groups > List page and select
Compare two groups. Select the same two groups again for updated information.
l Additional topics in this document describe the many fields that can appear on the Groups > List >
Compare page.
Dell Networking W-AirWave 8.2.4 | User Guide Configuring and Using Device Groups | 112