Users Guide

113 | Configuring and Using Device Groups Dell Networking W-AirWave 8.2.4 | User Guide
Deleting a Group
Perform the following steps to delete an existing Group from the W-AirWave database:
1. Browse to the Groups > List configuration page.
2. Ensure that the group you wish to delete is not marked as the default group. (See the AMP Setup >
General page.) W-AirWave does not permit you to delete the current default group.
3. Ensure that there are no devices in the group that you want to delete. W-AirWave does not permit you to
delete a group that still contains managed devices. You must move all devices to other groups before deleting
a group.
4. Ensure that the group is not a global group that has subscriber groups, and is not a group that was pushed
from a Master Console. W-AirWave will not delete a group in which either of those cases is true.
5. Select the checkbox, and click the Delete button.
Changing Multiple Group Configurations
Perform the following steps to make any changes to an existing group's configuration:
1. Browse to the Groups > List configuration page.
2. Select the Modify button (the wrench icon) for the group you wish to edit. The Groups > Basic
configuration page appears.
3. Select the fields to be edited on the Basic configuration page. Other group configuration pages may be
available, depending upon the type of devices included in that group. or go to Radio, Security, VLANs, or
MAC ACL configuration page and edit the fields. Use the Save button to store the changes prior to applying
them.
4. When all changes for the group are complete select the Save and Apply button to make the changes
permanent. Figure 48 illustrates the confirmation message that appears.