Users Guide

Figure 60:APs/Devices > New Page Illustration
Unignoring a Device
Perform these steps to return an ignored device to a managed status.
1. To view all devices that are ignored, go to the APs/Devices > Ignored page, illustrated in Figure 61.
Figure 61:APs/Devices > Ignored Page Illustration
This page provides the following information for any ignored device:
l device name or MAC address, when known
l controller associated with that device
l device type
l device IP address
l LAN MAC address for the LAN on which the device is located
l date and time of device discovery
2. To change the device parameters for a given device, select its checkbox and adjust group, folder, monitor, and
manage settings as desired.
3. Select Add to add the device to W-AirWave so that it appears on the APs/Devices > New list.
4. The Unignore button will either return the device to its regular folder or group or send it to the APs/Devices
> New
page.
Troubleshooting a Newly Discovered Down Device
If the device status on the APs/Devices > List page remains Down after it has been added to a group, the most
likely source of the problem is an error in the SNMP community string being used to manage the device. Perform
Dell Networking W-AirWave 8.2.4 | User Guide Configuring and Using Device Groups | 130