Users Guide

Figure 77:Spectrum Analysis on Controller Dashboard
To disable Spectrum mode on this individual AP after it has collected data, return to the APs/Devices >
Manage page for this AP and set the Spectrum Override field back to No.
Configuring a Controller to use the Spectrum Profile
You can use W-AirWave to customize individual fields in the profile instance used by a particular controller
without having to create new Dell Networking W AP groups and new radio profiles. To do this, you can set a
controller-level override for its referenced Spectrum profile on the APs/Devices > Manage page, as illustrated
in Figure 78. This will affect all Spectrum-supported APs managed by this controller.
Figure 78:Override Section of a Supported Controller's Manage Page
Perform these steps to override individual profile settings for a Dell Networking W-Series controller that is part of
a spectrum-mode Dell Networking W AP group:
1. Select a Spectrum-supported Dell Networking W-Series controller that is referencing a Spectrum profile, and
go to its APs/Devices > Manage page. Set it to Manage Read/Write mode.
2. Under the Dell Networking W Overrides section, click the Add New Dell Controller Override button.
Dell Networking W-AirWave 8.2.4 | User Guide Monitoring the Network | 150