Users Guide

153 | Monitoring the Network Dell Networking W-AirWave 8.2.4 | User Guide
Figure 80:APs/Devices > Interfaces Page for Wired Devices (partial view)
.
The Interfaces page includes a summary of all the device interface, including Up/Down status, client and
bandwidth Information. For stacked switches, the master switch displays information for the interfaces of all the
members, including its own. The physical and the virtual interfaces are displayed in separate Physical
Interfaces and Virtual Interfaces tables. VLANs are listed in the VLAN table below the interface tables.
You can change the Auto-Detect Interface Capacity or the Interface Label settings by selecting the Edit
Interfaces link at the top of these tables, or by clicking the edit (pencil) icon beside each interface name.
Interface labels are used to group one or more interfaces for the purpose of defining interface bandwidth
triggers.
The Interfaces page for AirMesh APs includes VLANs as part of the Virtual Interfaces. When no management interface
is specified, VLAN1 will be treated as management interface. If VLAN1 does not exist, then Ethernet 0 will be treated as
the management interface
View Individual Interface Statistics
Select any interface name in the Physical Interface or Virtual Interface tables on the APs/Devices >
Interfaces page to display the APs/Devices > Interface Monitoring page, which displays Usage and
Interface Frame Counter charts for the selected interface, as well as a list of any connected clients.