Users Guide

Figure 93:Additional Details of the Connected Devices and Switch Interface
Filter the Map
You can quickly change the topology map to monitor and visualize your network by applying filters.
By default, W-AirWave hides access points from the topology map. To see access points, select AP from the filter list.
To apply a filter:
1. Select Filter from the task pane.
Figure 94:Filtering Devices
2. Hide or unhide the devices based on device type. The topology map displays only selected device types.
Nodes and their connections are highlighted and shadowed in the VLAN view, as shown in Figure 95.
Dell Networking W-AirWave 8.2.4 | User Guide Monitoring the Network | 162