Users Guide

165 | Configuring and Managing Devices Dell Networking W-AirWave 8.2.4 | User Guide
Figure 96:APs/Devices > Manage > General Section Illustration
3. Select Manage Read/Write on the Management Mode field.
4. Select Save and Apply, then Confirm Edit on the confirmation page to retain these settings and to push
configuration to the device.
5. For device configuration changes that require the device to reboot, use the Schedule function to push the
changes at a time when WLAN users will not be affected.
6. To move multiple devices into managed mode at once, use the Modify Devices link on an AP list page. For
more information, refer to "Modifying Multiple Devices" on page 115.
Use the Enable Planned Maintenance Mode field in APs/Devices > Manage > General to put this device into
planned maintenance. During the maintenance mode, no AP Down triggers will be deployed on these devices. Users
will not be able to delete folders that contain devices in Planned Maintenance. The devices in Planned Maintenance will
showthe Up status, but will not be tracked in historical graphs and logs as Up. You can set multiple devices into Planned
Maintenance Mode in the Modify Devices link on an AP list page.
Configuring AP Settings
1. Browse to the APs/Devices > List page and mouse over the name of the device whose AP settings you want
to edit. Click the Manage link for that device. Figure 97 illustrates one example of this page. (Note that the
page and fields vary based on the device type.)