Users Guide

Figure 97:APs/Devices > Manage Page Illustration (partial view)
If any changes are scheduled for this AP, they appear in a Scheduled Changes section at the top of the page
above the other fields. The linked name of the job takes you to its System > Configuration Change Job
Detail page.
2. Locate the General section for information about the AP’s current status. Table 86 describes the fields,
information, and settings.
Field Description
Name Displays the name currently set on the device.
Status Displays the current status of an AP. If an AP is Up, then W-AirWave is able to ping it
and fetch SNMP information from the AP. If the AP is listed Down then W-AirWave is
either unable to ping the AP or unable to read the necessary SNMP information from
the device.
Configuration Displays the current configuration status of the AP. To update the status, select Audit
on the APs/Devices > Audit page.
Last Contacted Displays the last time W-AirWave successfully contacted the AP.
Table 86: APs/Devices > Manage > General Fields and Descriptions
Dell Networking W-AirWave 8.2.4 | User Guide Configuring and Managing Devices | 166