Users Guide

Setting Default Device
Type
Description
Domain Name None IOS Field populated upon initial device discovery or upon
refreshing settings. Enable this option from AMP Setup
> Network page to display this field on the APs/Devices
> Manage page, with fully-qualified domain names for
IOS APs. This field is used in conjunction with Domain
variable in IOS templates.
Mesh ID None Mesh Text field for entering the Mesh ID.
Timezone None Instant Drop-down menu for specifying the controller timezone.
Syslog Server None Instant Text field for specifying the a syslog server for the
controller.
RADIUS Server None Instant Text field for specifying the a RADIUS server for the
controller.
RF Band Selection All Instant Drop-down menu for specifying the RF Band on the
controller.
Location Read from
the device
All The SNMP location set on the device.
Latitude None All Text field for entering the latitude of the device. The
latitude is used with the Google Earth integration.
Longitude None All Text field for entering the longitude of the device. The
longitude is used with the Google Earth integration.
Altitude (meters) None All Text field for entering the altitude of the device when
known. This setting is used with the Google Earth
integration. Specify altitude in meters.
Group Default
Group
All Drop-down menu that can be used to assign the device
to another Group.
Folder Top All Drop-down menu that can be used to assign the device
to another Group.
Auto Detect
Upstream Device
Yes All Selecting Yes enables automatic detection of upstream
device, which is automatically updated when the device
is polled.
Selecting No displays a drop-down menu of upstream
devices.
Automatically
clear Down Status
Message when
device comes
back up
None All Whether the message entered in the Down Status
Message field should be removed after the device
returns to the Up status.
Down Status
Message
None All Enter a text message that provides information to be
conveyed if the device goes down.
Table 87: APs/Devices > Manage > Settings Fields and Default Values (Continued)
Dell Networking W-AirWave 8.2.4 | User Guide Configuring and Managing Devices | 168