Users Guide

181 | Creating and Using Templates Dell Networking W-AirWave 8.2.4 | User Guide
Setting Description
Device Type Displays the template that applies to APs or devices of the specified type. If (Any Model) is
selected for a vendor, then the template applies to all models from that vendor that do not
have a version-specific template defined. If there are two templates that might apply to a
device, the template with the most restrictions takes precedence.
Status Displays the status of the template.
Fetch Date Sets the date that the template was originally fetched from a device.
Version
Restriction
Designates that the template only applies to APs running the version of firmware specified. If
the restriction is None, then the template applies to all the devices of the specified type in the
group. If there are two templates that might apply to a device the template with the most
restrictions takes precedence. If there is a template that matches a devices firmware it will be
used instead of a template that does not have a version restriction.
Table 92: Groups > Templates Fields and Default Values (Continued)
3. To create a new template and add it to the W-AirWave template inventory, go to the Groups > List page, and
select the group name. The Details page appears.
4. Select Templates, and then Add.
5. Complete the configurations illustrated in Figure 105.