Users Guide

Figure 110:RAPIDS > Rules Page Illustration
Table 103 defines the fields in the RAPIDS > Rules page.
Field Description
Default Classification This drop down specifies the classification that a rogue device receives when it
does not match any rules.
Add New RAPIDS
Classification Rule
Select this button to create a RAPIDS classification rule.
Rule Name Displays the name of any rule that has been configured. Rule names should be
descriptive and should convey the core purpose for which it was created.
Classification Displays the classification that devices receive if they meeting the rule criteria.
Threat Level Displays the numeric threat level for the rogue device that pertains to the rule.
Refer to "Rogue Device Threat Level" on page 205 for additional information.
Enabled Displays the status of the rule, whether enabled or disabled.
Reorder Drag and Drop
Icon
Changes the sequence of rules in relation to each other. Select, then drag and
drop, the icon for any rule to move it up or down in relation to other rules. A
revised sequence of rules must be saved before rogues are classified in the
revised sequence.
NOTE: The sequence of rules is very important for proper rogue classification. A
device gets classified by the first rule to which it complies, even if it conforms to
additional rules later in the sequence.
Table 103: RAPIDS > Rules Page
To create a new rule, select the Add button next to New RAPIDS Classification Rule to launch the RAPIDS
Classification Rule page (see Figure 111).
Dell Networking W-AirWave 8.2.4 | User Guide Using RAPIDS and Rogue Classification | 206