Users Guide

207 | Using RAPIDS and Rogue Classification Dell Networking W-AirWave 8.2.4 | User Guide
Figure 111:Classification Rule Page
Fill in the settings described in Table 103 then select an option from the drop down menu.
Table 104 defines the drop down menu options that are at the bottom left of the RAPIDS Classification Rule
dialog box (see Figure 111). After all rule settings are defined, select Add. The new rule automatically appears in
the RAPIDS > Rules page.
Option Description
Wireless Properties
Detected on WLAN Classifies based on how the rogue is detected on the wireless LAN.
Detecting AP Count Classifies based on the number of managed devices that can hear the rogue. Enter
a numeric value and select At Least or At Most.
Encryption Classifies based on the rogue matching a specified encryption method. Note that
you can select no encryption with a rule that says Encryption does not match
WEP or better.
Network type Rogue is running on the selected network type, either Ad-hoc or Infrastructure.
Signal Strength Rogue matches signal strength parameters. Specify a minimum and maximum
value in dBm.
SSID Classifies the rogue when it matches or does not match the specified string for the
SSID or a specified regular expression.
NOTE: For SSID matching functions, W-AirWave processes only alpha-numeric
characters and the asterisk wildcard character (*). W-AirWave ignores all other
non-alpha-numeric characters. For example, the string of ethersphere-* matches
the SSID of ethersphere-wpa2 but also the SSID of ethersphere_this_is_an_
example (without any dashes).
Channel
Rogue matches a specified Channel number. Enter channel numbers in the valid
format to match rogue devices.
Detected Client Count Classifies based on the number of valid clients.
Table 104: Properties Drop Down Menu