Users Guide

Column Description
OS This field displays the OS of the device, as known. OS is the result of a running an OS
port scan on a device. An IP addresses is required to run an OS scan. The OS reported
here is based on the results of the scan.
Model Displays the model of rogue device, if known. This is determined with a fingerprint scan,
and this information may not always be available.
IP Address Displays the IP address of the rogue device. The IP address data comes from fingerprint
scans or ARP polling of routers and switches.
Last Discovering
AP
Displays the most recent AP to discover the rogue device. The device name in this
column is taken from the device name in W-AirWave. Click the linked device name to be
redirected to the APs/Devices > Monitor page for that AP.
Switch/Router Displays the switch or router where the device’s LAN MAC address was last seen.
Port Indicates the physical port of the switch or router where the rogue was last seen.
Notes Indicates any notes about the rogue device that may have been added.
Last Seen Indicates the date and time the rogue device was last seen.
Current
Associations
The number of current rogue client associations to this device.
Max associations The highest number of rogue client associations ever detected at one time.
Table 105: RAPIDS > List Column Definitions (Continued)
Overview of the RAPIDS > Detail Page
Select a device Name in the RAPIDS > List page to view the Detail page (Figure 113).
Dell Networking W-AirWave 8.2.4 | User Guide Using RAPIDS and Rogue Classification | 212