Users Guide
253 | Performing Daily Administration in W-AirWave Dell Networking W-AirWave 8.2.4 | User Guide
1 day using the time-range options in the upper-right corner of this page, and W-AirWave will remember the new
setting the next time the page is launched.
The left graph shows client information - specifically the current and average number of clients over the last 40
weeks during the selected time range. The right graphs show usage information - specifically the current and
average incoming and outgoing bits-per-second over the last 40 weeks during the selected time range. The
shaded/gray color within the graphs indicates the standard deviation. Any blue lines (Avg Clients, Avg Out Usage)
or green lines (Avg In Usage) that appear outside of the shaded/gray area can be considered deviation points
because the value does not come within the range of the calculated standard deviation.
This operation can consume a significant amount of CPUcapacity as it parses through large amounts of data. Larger
deployments you may have to wait up to a minute before seeing the initial graph plot points. In addition, this page does
not automatically refresh, rather it refreshes each time this page is selected and/or each time you click Refresh. As a
result, if you click this page, navigate away, and then return to this page, the page will begin to load again. If your
network includes a large amount of data, then a best practice is to open this page in a new tab before navigating to
another page. In this case, the Network Deviations page will continue to load while you continue to work in W-AirWave.
Figure 140:Home > Network Deviations page
The first time this page is launched, the graphs will display information for all devices in the Top folder. To specify
a different folder, simply select one from the folder drop down in the upper-right corner, and then refresh the
page. W-AirWave will remember the new setting the next time that the page is launched.
By default, the graphs display average and standard deviation information for the current time over the last 40
weeks. Click the gear icon in the upper right corner to change these defaults. W-AirWave will remember the new
setting the next time that the page is launched.
The Thresholds button is disabled while the page is loading. The Folder drop down is disabled until the first plot points
display.