Users Guide

261 | Performing Daily Administration in W-AirWave Dell Networking W-AirWave 8.2.4 | User Guide
Figure 145:Public Portal Page Illustration
The Public Portal supports configuration of the iPhone interface, which can be configured using the Master
Console W-AirWave page.
Adding a Managed AMP with the Master Console
Perform the following steps to add a managed W-AirWave console.
1. Navigate to the Home > Managed AMPs page.
2. Select the pencil icon to edit or reconfigure an existing AMP console, or select Add New Managed AMP to
create a new AMP console. The Managed AMP page appears. Complete the settings on this page as
described in Table 127.
Field Default Description
Hostname / IP Address N/A Enter the IP address or Hostname of the W-AirWave server to be
managed.
Polling Enabled Yes Enables or disables the Master Console polling of managed W-AirWave
server.
Polling Period 5
minutes
Determines how frequently the Master Console polls the managed W-
AirWave server.
Username N/A The user name used by the Master Console to login to the managed W-
AirWave server. The user needs to be an AP/Device Manager or W-
AirWave Administrator.
Password
(Confirm Password)
N/A The password used by the Master Console to login to the managed W-
AirWave server.
HTTP Timeout
(5-1000 sec)
60 Defines the timeout period used when polling the managed W-AirWave
server.
Table 127: Managed AMP fields and default values