Users Guide

l "Automatic Authorization Settings" on page 29
l "Dell Instant Settings" on page 29
l "Top Header Settings" on page 30
l "Search Method" on page 30
l "Home Overview Preferences" on page 31
l "Display Settings" on page 31
l "Device Configuration Settings" on page 32
l "AMP Features" on page 33
l "External Logging Settings" on page 33
l "Historical Data Retention Settings" on page 34
l "Firmware Upgrade Defaults" on page 36
l "Additional AMP Services" on page 36
l "Performance Settings" on page 38
General Settings
Browse to the AMP Setup > General page, locate the General section, and enter the information described in
Table 3:
Setting Default Description
System Name Defines your name for your W-AirWave server, with a maximum limit
of 20 alphanumeric characters.
Default Group Access
Points
Sets the device group that this W-AirWave server uses as the default
for device-level configuration. Select a device group from the drop-
down menu. A group must first be defined on the Groups > List page
to appear in this drop-down menu. For additional information, refer to
"Configuring and Using Device Groups" on page 72.
Device
Configuration
Audit Interval
Daily This setting defines the interval of queries which compares actual
device settings to the Group configuration policies stored in the W-
AirWave database. If the settings do not match, the AP is flagged as
mismatched and W-AirWave sends an alert via email, log, or SNMP.
NOTE: Enabling this feature with a frequency of Daily or more
frequently is recommended to ensure that your AP configurations
comply with your established policies. Specifying Never is not
recommended.
Automatically
repair
misconfigured
devices
Disabled If enabled, this setting automatically reconfigures the settings on the
device when the device is in Manage mode and W-AirWave detects a
variance between actual device settings and the Group configuration
policy in the W-AirWave database.
Help improve
AirWave by
sending
anonymous usage
data
Disabled If enabled, W-AirWave will send anonymous data to Dell, which may be
used to improve the W-AirWave software. To view an example of the
data that will be sent, click the preview link.
Table 3: AMP Setup >General > General Section Fields and Default Values
Dell Networking W-AirWave 8.2.4 | User Guide Configuring W-AirWave | 28