Users Guide

Figure 155:Daily Configuration Audit Report Page, partial view
Field Description
Name Displays the device name for every device on the network. Selecting a given device name in
this column allows you to display device-specific configuration.
Folder Displays the folder in which the device is configured in W-AirWave. Selecting the folder name
in this report displays the APs/Devices > List page for additional device, folder and
configuration options.
Group Displays the group with which any given device associates. Selecting the group for a given
device takes you to the Groups > Monitor page for that specific group, to display graphical
group information, modification options, alerts, and an audit log for the related group.
Mismatches This field displays configuration mismatch information. When a device configuration does not
match ideal configuration, this field displays the ideal device settings compared to current
settings.
Table 134: Daily Configuration Audit Report
Using the Device Summary Report
The Device Summary Report identifies devices that are the most or least used devices, and a comprehensive list
of all devices. One potential use of this report is to establish more equal bandwidth distribution across multiple
devices. This report contains the following five lists of devices.
l Most Utilized by Maximum Number of Simultaneous Users—By default, this list displays the 10
devices that support the highest numbers of users. This list provides links to additional information or
configuration pages for each device to make adjustments, as desired.
l Most Utilized by Bandwidth—By default, this list displays the 10 devices that consistently have the highest
bandwidth consumption during the time period defined for the report. This list provides links to additional
information or configuration pages for each device.
l Least Utilized by Maximum Number of Simultaneous Users—By default, this list displays the 10
devices that are the least used, according to the number of users.
Dell Networking W-AirWave 8.2.4 | User Guide Creating, Running, and Sending Reports | 280