Users Guide

Using the PCI Compliance Report
W-AirWave supports PCI requirements in accordance with the Payment Card Industry (PCI) Data Security
Standard (DSS). The PCI compliance report, shown in Figure 1, displays current PCI configurations and status.
This report provides recommendations to resolve issues when possible.
Figure 160:PCI Compliance Report
For information about turning on this feature, see "Enabling PCI Compliance Monitoring" on page 67.
Using the IDS Events Report
The IDS Events Report lists and tracks IDS events on the network involving APs or controller devices. This report
cites the number of IDS events for devices that have experienced the most instances in the prior 24 hours, and
provides links to support additional analysis or configuration in response. You can filter this report to show
IDSevents for specific devices (Controllers, APs, etc.) By default, this report will show up to 10 IDS for each
specified device type. You can change this value to anything other than 0.
Your role must be enabled to view RAPIDS in order to see this report. In addition, this report requires that you enter a
Dell Networking W-AirWave 8.2.4 | User Guide Creating, Running, and Sending Reports | 286