Users Guide

335 | Using VisualRF Dell Networking W-AirWave 8.2.4 | User Guide
Post Processing Steps
1. Decrease the Location Caching Timer to previous value.
2. Review the VisualRF > Floor Plans page to ensure server is keeping up.
Sample Upload Instruction XML File
<?xml version="1.0" encoding="ISO-8859-1"?>
<visualrf:site_batch xmlns:visualrf="http://www.airwave.com"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" version="1" origin="lower-left">
<floor name="1st Floor" number="43" building-name="Library" campus-name="University">
<image filename="blueprint1.dwg"/>
<access-points>
<access-point name="ART.1.1" x="190.26" y="222.31"/>
<access-point name="ART.1.2" x="136.12" y="208.60"/>
<access-point name="ART.1.3" x="75.02" y="221.47"/>
<access-point name="ART.1.4" x="73.41" y="132.48"/>
<access-point name="ART.1.9" x="196.67" y="98.34"/>
<access-point name="ART.1.8" x="179.07" y="55.97"/>
<access-point name="ART.1.7" x="119.64" y="56.12"/>
<access-point name="ART.1.6" x="74.53" y="56.36"/>
<access-point name="ART.1.5" x="59.18" y="38.01"/>
</access-points>
</floor>
<floor name="2nd Floor" number="44" building-name="Library" campus-name="University">
<image filename="blueprint2.dwg"/>
<access-points>
<access-point name="ART.2.12" x="196.31" y="92.19"/>
<access-point name="ART.2.11" x="204.82" y="55.78"/>
<access-point name="ART.2.10" x="133.08" y="55.81"/>
<access-point name="ART.2.9" x="73.79" y="55.78"/>
<access-point name="ART.2.8" x="73.72" y="104.26"/>
<access-point name="ART.2.7" x="73.91" y="134.88"/>
<access-point name="ART.2.6" x="73.83" y="162.72"/>
<access-point name="ART.2.5" x="73.82" y="183.61"/>
<access-point name="ART.2.4" x="63.74" y="125.48"/>
</access-points>
</floor>
</visualrf:site_batch>
Common Importation Problems
l Improper or undefined UNITS or MEASURE
l Text embedded into the Model view which causes an inconsistent bounding box
l Large dimensions which cause grainy resolution upon zoom
l Legacy CAD versions prior to Release 15 or AutoCAD 2000.
Importing from a Dell Networking W-Series Controller
The instructions below will enable you to seamlessly migrate all building, campus, and floor plan information
previously entered into a Dell Networking W-Series controller.
Pre-Conversion Checklist
Prior to importing floor plans, ensure that the VisualRF memory allocation is sufficient for the anticipated
number of floor plans.
To change the memory allocation, navigate to the VisualRF > Setup page and configure the memory allocation
accordingly. Memory allocation should equal .5 GB for 1-75 floor plans, 1 GB for 76-250 floor plans, 1.5 GB for
251-500 floor plans, and 2 GB for 501-1,000 floor plans.