Users Guide

43 | Configuring W-AirWave Dell Networking W-AirWave 8.2.4 | User Guide
2. Select Add to create a new user, select the pencil icon to edit an existing user, or select a user and select
Delete to remove that user from W-AirWave. When you select Add or the edit icon, the Add User page
appears, illustrated in Figure 15.
Currentusers cannot change their own role. The Role drop-down field is disabled to prevent this.
Figure 15: AMP Setup > Users > Add/Edit User Page Illustration
3. Enter or edit the settings on this page. Table 18 describes these settings in additional detail.
Setting Default Description
Username None Sets the user name for the user who logs in to W-AirWave. This user name is
displayed in W-AirWave log files.
Role None Specifies the user’s Role, which defines the Top viewable folder as well as the
type and access level of the user specified in the previous field.
The admin user defines user roles on the AMP Setup > Roles page, and each
user in the system is assigned to a role.
Password None Sets the password for the user being created or edited. Enter an alphanumeric
string without spaces, and enter the password again in the Confirm Password
field.
NOTE: Because the default user's password is identical to the Name, you should
change this password. You will be logged out and asked to enter your new
password.
Name None Allows you to define an optional and alphanumeric text field that takes note of the
user's actual name.
Table 18: AMP Setup > Users > Add/Edit User Fields and Default Values