Users Guide

67 | Configuring W-AirWave Dell Networking W-AirWave 8.2.4 | User Guide
Figure 25:PCI Compliance Report Example
You can find the PCI compliance report for a device by navigating to APs/Devices > List, hovering the pointer
over a device, and clicking Compliance from the shortcut menu, as shown in . If you created a PCI compliance
report from the Reports Definition page, W-AirWave displays the report on the Generated Reports page
when it is available. For information, see "Viewing, Running, and Deleting Reports" on page 1.
You can schedule, view, and re-run custom PCI compliance reports. For information about working with reports,
see "Creating, Running, and Sending Reports" on page 264.
Enabling PCI Compliance Monitoring
When you enable PCI compliance monitoring, W-AirWave displays real-time information and generates PCI
compliance reports that can be used to verify whether a merchant is compliant with a PCI requirement.
For information security standards, refer to the PCI Quick Reference Guide, accessible online from the PCI
Security Council Document Library or see "Supported PCI Requirements" on page 68.
To enable PCI auditing:
1. Navigate to the AMP Setup > PCI Compliance page.
2. Find the PCI requirement that you want to monitor.