Users Guide

5. Convert existing floor plans to VisualRF to include the following elements:
l Dell Networking W-Series ArubaOS
l RF Plan
6. Use RTLS for increasing location accuracy (optional):
a. Enable RTLS service on the W-AirWave server.
b. Enable RTLS on ArubaOS infrastructure.
Integrating External Servers
W-AirWave supports integration with Juniper, Brocade or HPE Intelligent Management Center (IMC) servers.
When a device is monitored by W-AirWave and an external server, the APs/Devices > Monitor page for that
device provides a link to that external server.
Add a Juniper Network Director
W-AirWave supports integration with Juniper Network Director (ND) 2.0. Once integrated, the APs/Devices >
Monitor page for that device provides access to a link the Juniper Network Director WebUI.
To integrate Juniper Network Director with W-AirWave:
1. Log in to W-AirWave, then navigate to AMP Setup > External server.
2. In the Juniper Network Director section, enter the IP address or hostname of the Juniper Network
Director.
3. Click Save.
Add a Brocade Network Advisor
W-AirWave can monitor and secure Brocade wired networks, while Brocade Network Advisor monitors Aruba
networks. Once integrated, the Brocade Network Advisor appears in the Devices list on the W-AirWave
APs/Devices > List page, and the APs/Devices > Monitor page for that device provides access to the Brocade
Network Advisor home page.
To integrate Brocade Network Advisor with W-AirWave:
1. Log in to W-AirWave, then navigate to AMP Setup > External server.
2. In the Brocade Network Advisor section, enter the IP address or hostname of the Brocade Network
Advisor.
3. Click Save.
Add an HPE Intelligent Management Center
When a managed device is monitored by both W-AirWave and the HPE Intelligent Management Center (IMC)
Enterprise Software Platform, the APs/Devices > Monitor page for that device includes a link to the IMC
server.
Dell Networking W-AirWave 8.2.4 | User Guide Configuring W-AirWave | 70