Users Guide

73 | Configuring and Using Device Groups Dell Networking W-AirWave 8.2.4 | User Guide
Menu
Item
Description Refer to
Templates This page manages templates for any device group. Templates allow you to manage the
configuration of Dell Networking W-Series, 3Com, Alcatel-Lucent, Aruba Networks, Cisco
Aironet IOS, Cisco Catalyst switches, Enterasys, HPE, Nortel, Symbol and Trapeze
devices in a given group using a configuration file. Variables in such templates configure
device-specific properties, such as name, IP address and channel. Variables also define
group-level properties.
"Creating and
Using
Templates" on
page 178
Security This page defines general security settings for device groups, to include RADIUS,
encryption, and additional security settings on devices.
"Configuring
Group
Security
Settings" on
page 87
SSID This page sets SSIDs, VLANs, and related parameters in device groups. Use this
submenu is available when you configure RADIUS servers on the Groups > AAA Servers
page.
"Configuring
Group SSIDs
and VLANs"
on page 92
AAA
Servers
This page configures authentication, authorization, and accounting settings in support of
RADIUS servers for device groups.
"Adding and
Configuring
Group AAA
Servers" on
page 86
Radio This page defines general 802.11 radio settings for device groups. "Configuring
Radio Settings
for Device
Groups" on
page 95
Controller
Config
This page manages ArubaOS Device Groups, AP Overrides, and other profiles specific to
Dell Networking W-Series devices on the network. Use this page as an alternative to the
Device Setup > Dell Networking W >Configuration page. The appearance of this
page varies depending on whether W-AirWave is configured for global configuration or
group configuration.
Dell
Networking W-
Series
Controller
Configuration
Guide
Instant
Config
This page manages Dell Networking W-Instant devices on the network. Dell
Networking W-
Series Instant
User Guide
Cisco WLC
Config
The Groups > Cisco WLC page appears in the navigation bar if the you navigate to
Groups > List and select a group that contains Cisco WLC devices.
This page consolidates controller-level settings from the Group Radio, Security, SSIDs,
Cisco WLC Radio and AAA Server pages into one navigation tree that is easier to
navigate, and has familiar layout and terminology. Bulk configuration for thin AP
settings, previously configured on the Group LWAPP APs tab, can now be performed
from Modify Devices on the APs/Devices > List page. .
"Cisco WLC
Group
Configuration"
on page 99
PTMP This page defines settings specific to Proxim MP devices when present. As such, this
page is only available when a Proxim MP device is added to this group.
"Configuring
Group PTMP
Settings" on
page 106.
Table 35: Groups pages (Continued)