Users Guide

Setting Default Description
Authentication Profile
Index
3 For Proxim devices only, this field sets the name of the accounting
profile index to be supported in this device group.
MAC Address Authentication Section
MAC Address
Authentication
No If enabled, only MAC addresses known to the RADIUS server are
permitted to associate to APs in the Group.
MAC Address Format Single
Dash
Allows selection of the format for MAC addresses used in RADIUS
authentication and accounting requests:
l Dash Delimited: xx-xx-xx-xx-xx-xx (default)
l Colon Delimited: xx:xx:xx:xx:xx:xx
l Single-Dash: xxxxxx-xxxxxx
l No Delimiter: xxxxxxxxxxxx
This option is supported only for Proxim AP-600, AP-700, AP-2000, AP-
4000, Avaya AP3/4/5/6/7/8, HPE ProCurve 520WL
Authorization Lifetime 1800 Sets the amount of time a user can be connected before
reauthorization is required. The supported range is from 900 to 43,200
seconds.
Primary RADIUS Server
Reattempt Period
0 Specifies the time (in minutes) that the AP awaits responses from the
primary RADIUS server before communicating with the secondary
RADIUS server, and so forth
Table 55: Groups > Security Page Fields and Default Values (Continued)
The Encryption options display on the Groups > Security page when the VLAN Tagging and Multiple SSIDs
option is set to Disabled. This setting defaults to No Encryption. Refer to Table 56 for information regarding
configuring encryption.
Setting Default Description
Encryption Modes: Require 802.1X, Optional WEP, Require WEP, Require 802.1X, Require LEAP,
802.1X + WEP, 802.1X + WEP, LEAP + WEP,
Encryption Mode Require
802.1X
Transmit Key 1 Select the Transmit Key value. This can be a value from 1 through 4. Note
that 802.1X + WEP mode sets this key value to 1.
Key #1 None Enter 40/64-bit Keys in 5 alphanumeric or 10 hexadecimal digits, or enter
104/128-bit Keys in 13 alphanumeric or 26 hexadecimal digits.
Key #2 None
Key #3 None
Key #4 None
Encryption Mode Static CKIP
CKIP Static Key
(hex) and Confirm
None Enter and confirm the Cisco Key Integrity Protocol (CKIP) static key,
specified in hexadecimal digits.
Table 56: Groups > Security Encryption Mode settings
Dell Networking W-AirWave 8.2.4 | User Guide Configuring and Using Device Groups | 90