Users Guide

95 | Configuring and Using Device Groups Dell Networking W-AirWave 8.2.4 | User Guide
9. Locate the RADIUS Accounting Servers area on the Groups > SSIDs configuration page and define the
settings. Table 62 describes the settings and default values.
Setting Default Description
RADIUS Accounting
Server 1-3 (Cisco WLC,
Proxim Only)
None Pull-down menu selects RADIUS Accounting servers previously entered
on the Groups > RADIUS configuration page. These RADIUS servers
dictate where the AP sends RADIUS Accounting packets for this
SSID/VLAN.
Accounting Profile
Name (Proxim Only)
None Sets the Accounting Profile Name for Proxim AP-600, AP-700, AP-2000,
AP-4000.
Accounting Profile
Index (Proxim Only)
None Sets the Accounting Profile Index for Proxim AP-600, AP-700, AP-2000,
AP-4000.
Table 62: Radius Accounting Servers Fields and Default Values
10.Select Add when you have completed all sections. This returns you to the Groups > SSIDs page.
11.Select Save to retain these SSID configurations for the group, select Save and Apply to make the changes
permanent, or select Revert to discard all unapplied changes.
What Next?
l Continue with additional Group procedures in this document as required.
Configuring Radio Settings for Device Groups
The Groups > Radio configuration page allows you to specify detailed RF-related settings for devices in a
particular group.
If you have existing deployed devices, you may want to use the current RF settings on those devices as a guide for
configuring the settings in your default Group.
Perform the following steps to define RF-related radio settings for groups.
1. Go to the Groups > List page and select the group for which to define radio settings by selecting the group
name. Alternatively, select Add from the Groups > List page to create a new group, define a group name. In
either case, the Monitor page appears.
2. Go to the Groups > Radio page. Figure 31 illustrates this page.