Users Guide
(switch-Name) # configure terminal
Enter Configuration commands, one per line. End with CNTL/Z
(switch-Name) (config) # ids management-profile
(switch-Name) (config) # ids general-profile <name>
(switch-Name) (config) # ids-events logs-and-traps
(switch-Name) (config) # write mem
Copy and Paste to Enable Proper Traps with the AOS-W CLI
To ensure the proper traps are configured on Alcatel-Lucent switches, copy and paste the following command in
config mode:
snmp-server trap enable wlsxNUserAuthenticationFailed
wlsxAdhocNetworkBridgeDetected
wlsxAdhocNetworkBridgeDetectedAP
wlsxAdhocNetworkBridgeDetectedSta
wlsxAdhocNetworkDetected
wlsxAdhocUsingValidSSID
wlsxAPChannelChange
wlsxApFloodAttack
wlsxAPImpersonation
wlsxAPModeChange
wlsxAPPowerChange
wlsxAPSpoofingDetected
wlsxBlockAckAttackDetected
wlsxChannelFrameErrorRateExceeded
wlsxChannelFrameFragmentationRateExceeded
wlsxChannelFrameRetryRateExceeded
wlsxChannelRateAnomaly
wlsxChopChopAttack
wlsxClientAssociatedToHostedNetwork
wlsxClientAssociatingOnWrongChannel
wlsxClientFloodAttack
wlsxCTSRateAnomaly
wlsxDisconnectStationAttackAP
wlsxDisconnectStationAttackSta
wlsxEAPRateAnomaly
wlsxFataJackAttack
wlsxFrameBandWidthRateExceeded
wlsxFrameFragmentationRateExceeded
wlsxFrameLowSpeedRateExceeded
wlsxFrameNonUnicastRateExceeded
wlsxFrameReceiveErrorRateExceeded
wlsxFrameRetryRateExceeded
wlsxHostOfWirelessNetworkContainment
wlsxHotspotterAttackDetected
wlsxHT40MHzIntoleranceAP
wlsxHT40MHzIntoleranceSta
wlsxHtGreenfieldSupported
wlsxInvalidAddressCombination
wlsxInvalidMacOUIAP
wlsxInvalidMacOUISta
wlsxMalformedAssocReqDetected
wlsxMalformedAuthFrame
wlsxMalformedFrameLargeDurationDetected
wlsxMalformedFrameWrongChannelDetected
wlsxMalformedHTIEDetected
wlsxNAccessPointIsDown
wlsxNAccessPointIsUp
wlsxNAdhocNetwork
wlsxNAdhocNetworkBridgeDetectedAP
OmniVista 3600 Air Manager 8.2.4 | Best Practices Guide Appendix A CLICommands | 39