Users Guide

Model Validated up to
WLC880 9.1.0.6.0
WLC JunosV 9.1.0.6.0
Juniper Switch 12.3R6.6
Table 8: Juniper AP Support (Continued)
Juniper®
Juniper switches have the following additional support through W-AirWave:
l Automated discovery through SNMP
l Model & software version identification
l Rogue AP detection is supported using the Q-BRIDGE MIB
Meru
®
Devices
The following Meru controllers and APs are now supported in VisualRF.
The firmware versions listed in the table below represents the latest firmware version verified as fully supported by W-
AirWave8.2.4. Informal testing shows that W-AirWave supports devices running more recent versions of firmware, but
full support for these later versions is not guaranteed.
Model Validated up to
AP302 6.1.1-25
AP320i 6.1.1-25
AP332i 6.1.1-25
AP433i 6.1.1-25
AP433is 6.1.1-25
AP822e 6.1.1-25
AP822i 6.1.1-25
AP832e 6.1.1-25
AP832i 6.1.1-25
RS4000 6.1.1-25
MC1000* 3.6.1-49
MC1550 6.1.1-25
MC3000* 3.6.1-49
MC3200 6.1.1-25
MC4200 6.1.1-25
MC5000* 3.6.1-49
*This version of W-AirWave supports monitoring for these devices.
Table 9: Meru Device Support
10 Dell Networking W-AirWave 8.2.4 | Supported Infrastructure Devices