Concept Guide

8 | Overview of VisualRF Dell PowerConnect W AirWave 7.2 | VisualRF User Guide
 Walls - Toggle walls on or off. On by default on all views.
 Users - Toggle wireless users on or off. On by default on all views.
 Tags - Toggle WiFi Tags on or off. Off by default on all views.
 Labels - Toggle labels on or off. Off by default on all views.
 Rogues - Toggle surveys on or off. Off by default on all views.
 Relational Lines Sub-menu - expanded by clicking on the down arrow
 Wired - Toggle lines between APs/sensors and their IDF.
 Mesh - Toggle lines between Mesh portals and nodes.
 Survey - Toggle lines between client (x,y) to APs by client during survey.
 Rogue - Toggle lines between rogue AP and radios which hear the AP
 User Neighbors - Toggle lines between client and radios which hear the client excluding the radio of
association.
 AP Neighbors - Toggle lines between APs which heard each other.
 Tag Neighbors - Toggle lines between WiFi Tags and radios which hear the Tags. For Tags there is no
radio of association.
 User Association - Toggle line between the wireless user and AP of association.
Frequency & PHY - select the desired frequency and PHY
 2.4 GHZ (lines are always blue)
 11b
 11g
 11ng
 5 GHz (lines are always green)
 11a
 11na
Options - Buttons
 Refresh - Refresh client locations.
 Preferences - Provides ability to configure user preferences (overlay types, grid lines, alerts, icon sizes). User
preferences are stored per browser. They can vary between users and between browsers. See “Configuring
QuickView Personal Preferences” on page17 for more details.
 General
 Enable Auto-Refresh - Will refresh data in the quick view at the specified interval.
 Show grid lines and size - Will overlay grid lines at the specified location making it easier to judge
distance.
NOTE: All 2.4 GHz lines are blue and 5 GHz lines are green. If both PHYs apply to a line, then it is yellow.
Table 3 Options Icons and Descriptions
Operation Icon Description
Refresh Refresh the floor plan to see changes
Preferences Configure personal viewing preferences