Concept Guide

36 | Planning and Provisioning Dell PowerConnect W AirWave 7.2 | VisualRF User Guide
Importing a Floor Plan
The following steps show how to import a floor plan background image file.
1. In VisualRF > Floor Plans, click Add New Floor Plan.
2. Select Browse to locate a floor plan image file.
3. Select the proper file and click Open.
4. In VisualRF, select Upload. This opens the image file along with VisualRF planning tools on the left hand
side.
Figure 33 Floor Plan Imported into VisualRF
 If floor plan does not require cropping, sizing, or layer control, then click Save and Close to begin
provisioning APs or Save and New to upload a new floor plan.
 If floor plan does require cropping, sizing, or layer control, then proceed to the next procedure.
Editing a Floor Plan Image
There are many ways to edit a floor plan that you have uploaded, as explained in the following topics:
 “Cropping the Floor Plan Image” on page37
 “Sizing a Non-CAD Floor Plan” on page37
 “Removing Color from a Floor Plan Image” on page37
 “Assigning Campus, Building and Floor Numbers” on page38
 “Assigning Optional Planner, Owner, or Installer Information for the Floor Plan” on page38
 “Controlling the Layers in the Uploaded Floor Plan (CAD only)” on page38
 “Error Checking of CAD Images” on page38