Concept Guide

Dell PowerConnect W AirWave 7.2 | VisualRF User Guide Planning and Provisioning | 41
Figure 38 Planning Region Drawing and Selection Illustration
4. Enter the following information into the Autoprovision APs window as described in Table 15 and illustrated
in Figure 39:
Table 15 Fields in the Autoprovision APs Window
Field Description
Device Section
AP Type The type of AP used in this planning region.
Radio Section
Phy Whether they PHY is set to 11n or no radio.
Xmit Transmit power of the APs.
Gain Gain of the APs.
EIRP EIRP of the APs.
Environment A range from 1-4 that best describes whether the environment is related to an office space,
cubicles, offices, or concrete.
Plan By Section
Coverage Coverage by Data Rate or Signal.
Number of APs Number of APs to place in the planning region.
Other Section
Plan Sensors Whether to plan sensors into the region.
Save Region as Walls Whether to save the edges of the planning region as walls.
Update Environment and Data
Rate
Whether to update the environment and data rate in case of changes.