Concept Guide

42 | Planning and Provisioning Dell PowerConnect W AirWave 7.2 | VisualRF User Guide
Figure 39 Autoprovision APs Window Illustration
5. When you’re finished selecting the desired options, select OK.
Tweaking a Planning Region
If the planning layout does not meet your expectations, you can edit by right-clicking within the region to see the
following options:
 Delete Planned APs in the Region - deletes only provisioned APs in the region
 Delete the Region - deletes the region and all planned APs.
 Edit the region - change the name of the region
 Copy the Region to floors above - will copy the region and auto plan for floors above.
To replicate a floor plan, follow these steps:
1. Navigate back to the Building view by clicking on the navigation tags in the bottom-right corner of the
window.
2. Right-click the floor and select Duplicate.
NOTE: The starting floor will add one to the highest floor in the building and the ending floor defaults to 10 more than the starting
floor.