Deployment Guide

There is no method in the AirWave UI to update user classification on mass to match the controller’s classification. Each
client must be updated individually within the AirWave UI.
Rules-Based Controller Classification
Using RAPIDS Defaults for Controller Classification
To use the controller's classification as RAPIDS classification, follow these steps:
1. Navigate to the RAPIDS > Rules page and select the pencil icon beside the rule that you want to change.
2. In the Classification drop-down menu, select Use Controller Classification as seen in Figure 25.
Figure 25 Using Controller Classification
3. Click Save when you are done.
Changing RAPIDS based on Controller Classification
1. Navigate to RAPIDS > Rules and select the desired rule.
2. In the Classification drop-down menu, select desired RAPIDS classification.
3. Select Controller Classification from the drop-down menu, as shown in Figure 26.
Dell Networking W-AirWave 7.7 | Best Practices Guide Dell Networking W-Series Specific Capabilities in AirWave | 35