Users Guide

16 | Controller Configuration in AirWave Dell Networking W-AirWave 7.7 | Controller Configuration
added from the controller's APs/Devices > Manage page. Figure 12 illustrates an APs/Devices > Manage page with
controller overrides.
Figure 12 APs/Devices > Manage page illustration (partial display)
APs/Devices > Monitor Page
Used in conjunction with the Manage page, the Monitor page enables review of device-level settings. This page is
large and often contains a great amount of information, including the following sections:
l Status information
l Controller’s License link
l Radio Statistics of some Dell Networking W thin APs
l User and Bandwidth interactive graphs
l CPU Utilization and Memory Utilization interactive graphs
l APs Managed by this controller list (when viewing a controller)
l Alert Summary
l Recent Events
l Audit Log
For additional information, refer to "Pushing Device Configurations to Controllers" on page 27.
APs/Devices > Audit Page
The APs/Devices > Audit page is used to view the configuration status of a device. You can also perform the following
tasks:
l Audit a device’s current configuration
l Update group settings based on the device’s current configuration using the Import button
l Customize settings to include/ignore during configuration audits
l View any mismatches