Users Guide

22 | Controller Configuration in AirWave Dell Networking W-AirWave 7.7 | Controller Configuration
Figure 16 Dell Networking W Configuration > Dell Networking W AP Groups > Add/Edit Details Page (Partial View)
For additional information about configuring Dell Networking W AP Groups, see "Dell Networking W AP
Groups Procedures and Guidelines" on page 25.
8. Add or edit WLANs in Dell Networking W Configuration as required.
a. Navigate to the Dell Networking W Configuration > WLANs page. This page can display all WLANs currently
configured, or it can display only selected WLANs.
b. Click Add to create a new WLAN, or click the pencil icon to edit an existing WLAN.
You can add or edit WLANs in one of two ways, as follows:
n Basic—This display is essentially the same as the ArubaOS Wizard View on the Dell Networking W-Series
controller. This page does not require in-depth knowledge of the profiles that define the Dell Networking W
AP Group.
n Advanced—This display allows you to select individual profiles that define the WLAN and associated Dell
Networking W AP Group. This page requires in-depth knowledge of all profiles and their respective settings.
The following sections of this configuration guide provides additional information and illustrations for
configuring WLANs:
n "General WLAN Guidelines" on page 26
n "WLANs" on page 44 for details on all WLAN settings
9. Add or edit Dell Networking W Configuration Profiles as required.
a. Navigate to the Dell Networking W Configuration > Profiles section of the navigation pane.