Manualshelf

Deployment Guide

ManualsBrandsDell ManualsAccess PlatformsW-Airwave
12345678910
message appears:
STEP 5: Assigning AMP's address
AirWave must be configured with a static IP.
--------------- Primary Network Interface Configuration -------------
1) IP Address : xxx.xxx.xxx.xxx
2) Netmask : xxx.xxx.xxx.xxx
3) Gateway : xxx.xxx.xxx.xxx
4) Primary DNS : xxx.xxx.xxx.xxx
5) Secondary DNS: xxx.xxx.xxx.xxx
9) Commit Changes
0) Exit (discard changes)
If you want to configure a second network interface, please
use AirWave's web interface, AMP Setup --> Network Tab
1. Enter the network information.
The Secondary DNS setting is an optional field.
2. To commit the changes, type 9 and then press Enter. To discard the changes, type 0 and then press Enter.
Step 6: Naming the AirWave Network Administration System
Upon completion of the previous step, the following message appears:
STEP 6: Naming AMP
AMP is currently set to: New AMP
Please enter a name for your AMP:
At the prompt, enter a name for your AirWave server and press Enter.
Step 7: Generating AMP’s SSL Certificate
Upon completion of the previous step, the following message appears on the screen:
STEP 7: Generating AMP's SSL Certificate
Does AMP have a valid DNS name on your network (y/n)?
1. If AirWave does not have a valid host name on the network, type n at the prompt. The following appears:
Generating SSL certificate for < IP Address >
2. If AirWave has a valid host name on the network, type y at the prompt. The following appears:
Enter AMP's fully qualified domain name:
3. Type the AirWave DNS name and press Enter. The following message appears:
Generating SSL certificate for < IP Address >
Proceed to the next step when the system prompts you.
Step 8: Changing the Default Root Password
Upon completion of the prior step, the following message appears:
STEP 8: Changing default root password.
It is strongly recommended that you change the default 'root' password.
Please use a password that you consider to be safe, secure, and memorable.
Changing password for user root.
New Password:
Dell Networking W-AirWave 8.0 | Installation Guide 5