Reference Guide

Dell PowerConnect W-AirWave 7.5 | Best Practices Guide AirWave and Dell PowerConnect W-Series Integration Strategies | 19
(Controller-Name) (config) # snmp-server host <AMP IP ADDR> version 2c <SNMP Community
String of Controller>
(Controller-Name) (config) # snmp-server trap source <Controller-IP>
(Controller-Name) (config) # write mem
ArubaOS Traps Utilized by AirWave
The following are Auth, IDS, and ARM traps utilized by AirWave:
 “Auth Traps” on page19
 “IDS Traps” on page19
 “ARM Traps” on page20
Auth Traps
 wlsxNUserAuthenticationFailed
 wlsxNAuthServerReqTimedOut
IDS Traps
 wlsxwlsxSignatureMatchAP
 wlsxSignatureMatchSta
 wlsxSignAPNetstumbler
 wlsxSignStaNetstumbler
 wlsxSignAPAsleap
 wlsxSignStaAsleap
 wlsxSignAPAirjack
 wlsxSignStaAirjack
 wlsxSignAPNullProbeResp
 wlsxSignStaNullProbeResp
 wlsxSignAPDeauthBcast
 wlsxSignStaDeauthBcastwlsxChannelFrameErrorRateExceeded
 wlsxChannelFrameFragmentationRateExceeded
 wlsxChannelFrameRetryRateExceeded
 wlsxNIpSpoofingDetected
 wlsxStaImpersonation
 wlsxReservedChannelViolation
 wlsxValidSSIDViolation
 wlsxStaPolicyViolation
 wlsxRepeatWEPIVViolation
 wlsxWeakWEPIVViolation
NOTE: Ensure the SNMP community matches those that were configured in Chapter 2, “Configuring AirWave for Global Dell
PowerConnect W-Series Infrastructure” .
NOTE: AirWave supports SNMP v2 traps and SNMP v3 informs in ArubaOS 3.4 and higher. SNMP v3 traps are not supported.