Service Manual

16 | Discovering Dell PowerConnect W-Series Infrastructure Dell PowerConnect W-AirWave |Version 7.3
Figure 7 Dell PowerConnect W Credentials in Device Setup > Add
4. Enter the required fields for configuration and basic monitoring:
 Telnet/SSH Username
 Telnet/SSH password
 “enable” password
5. Enter the required fields for WMS Offload
 SNMPv3 Auth Protocol
 SNMPv3 Privacy Protocol
 SNMPv3 Username
 Auth Password
 Privacy Password
NOTE: The protocols should be SHA and DES in order for WMS Offload to work.