Service Manual

Dell PowerConnect W-AirWave | Best Practices Guide AMP and Dell PowerConnect W-Series Integration Strategies | 23
(Controller-Name) (config) # snmp-server host <AMP IP ADDR> version 2c <SNMP COMMUNITY
STRING OF CONTROLLER>
(Controller-Name) (config) # snmp-server trap source <CONTROLLER'S IP>
(Controller-Name) (config) # write mem
ArubaOS Traps Utilized by AMP
The following are Auth, IDS, and ARM traps utilized by AMP:
 “Auth Traps” on page23
 “IDS Traps” on page23
 “ARM Traps” on page24
Auth Traps
 wlsxNUserAuthenticationFailed
 wlsxNAuthServerReqTimedOut
IDS Traps
 wlsxwlsxSignatureMatchAP
 wlsxSignatureMatchSta
 wlsxSignAPNetstumbler
 wlsxSignStaNetstumbler
 wlsxSignAPAsleap
 wlsxSignStaAsleap
 wlsxSignAPAirjack
 wlsxSignStaAirjack
 wlsxSignAPNullProbeResp
 wlsxSignStaNullProbeResp
 wlsxSignAPDeauthBcast
 wlsxSignStaDeauthBcastwlsxChannelFrameErrorRateExceeded
 wlsxChannelFrameFragmentationRateExceeded
 wlsxChannelFrameRetryRateExceeded
 wlsxNIpSpoofingDetected
 wlsxStaImpersonation
 wlsxReservedChannelViolation
 wlsxValidSSIDViolation
 wlsxStaPolicyViolation
 wlsxRepeatWEPIVViolation
 wlsxWeakWEPIVViolation
 wlsxFrameRetryRateExceeded
NOTE: Ensure the SNMP community matches those that were configured in Chapter 2, “Configuring AirWave for Global Dell
PowerConnect W-Series Infrastructure” .
CAUTION: Do not configure the SNMP version to v3 because AMP does not support SNMPv3 traps/informs.