Service Manual

30 | Dell PowerConnect W-Specific Capabilities in AMP Dell PowerConnect W-AirWave |Version 7.3
Remote AP Monitoring
To monitor remote APs, follow these steps:
1. From the APs/Devices > List page, filter on the Remote Device column to find remote devices.
2. To view detailed information on the remote device, select the device name. The page illustrated in Figure 14
appears.
Figure 14 Remote AP Detail Page
3. You can also see if there are users plugged into the wired interfaces in the Connected Users list.
ARM & Channel Utilization Information
ARM statistics & Channel utilization are very powerful tools for diagnosing capacity and other issues in your
WLAN.
1. Navigate to an APs/Devices > Monitor page for any of the following Dell PowerConnect W models: Dell
PowerConnect W-AP105, Dell PowerConnect W-AP92, Dell PowerConnect W-AP93, Dell PowerConnect
W-AP124, or Dell PowerConnect W-AP125.
2. In the Radios table, select a radio link under the Name column for a radio.
Figure 15 ARM and Channel Utilization Graphs
NOTE: This feature is only available when the remote APs are in split tunnel and tunnel modes.