Users Guide

22 | Controller Configuration in AirWave Dell Networking W-AirWave 8.0 | Controller Configuration Guide
Figure 14:APs/Devices > Audit Page Illustration
If the page reports a device mismatch, the page will display an Import button that allows you to import the Dell
Networking W-Series controller settings from a Dell Networking W-Series controller that has already been
configured. To import the complete configuration from the controller (including any unreferenced profiles) select the
Include unreferenced profiles check box. If you deselect the check box, AirWave will not import those files, and
will delete the unreferenced profiles/AP Groups on the controller when that configuration is pushed.
In Global Configuration:
Importing a global configuration creates all the Profiles and Dell Networking W AP Groups on the Device Setup >
Dell Networking W Configuration page. This action also adds and selects the Dell Networking W AP Groups that
appear on the Groups > Dell Networking W Config page.
The folder that contains all of the Profiles and Dell Networking W AP Groups is set to the top folder of the AirWave
user who imports the configuration. This folder is named Top in the case of managing administrators with read/write
privileges.