Deployment Guide

16 | Using Template Configuration Dell Networking W-Instant in W-AirWave 8.0 | Deployment Guide
Be sure that the default configuration is validated and has been pre-tested in a non-production environment prior to
applying it to a production network. Any changes that are made to this configuration will follow the same process each
time and will be applied to other Instant networks.
Figure 4:The Instant template editor
If you want to add additional variables to the template, the Allowed Variables section just to the right of the
Instant template editor shows you the set of variables that can be added.
Figure 5:Sample Allowed Variables
Refer to the Dell Networking W-AirWave 8.0 User Guide or detailed information about templates and variables.
Adding Additional Instant APs to AirWave
After the first Instant device has been provisioned and set up in AirWave, additional Instant networks in other
locations can be added and provisioned automatically. To do this, set the Automatically Authorized Virtual